TBN 100

Farrat TBN100 (formerly referred to as TBN260) thermal break
connection plates are high performance, medium strength thermal insulators used between flanged connections of internal and external steelwork and concrete to prevent thermal / cold bridging.

Produced from high performance materials they provide a
simple, economical and extremely effective solution to meeting
Part L of the building requirements by way of reducing heat loss
and the risk of internal condensation.

Farrat Thermal Breaks are also ideal for hot climate
conditions to insulate the cool, air conditioned interior from
the hot outside conditions.

Pads are supplied according to the customer’s drawings, cut
to size with all holes or slots etc drilled and clearly labelled
for easy identification on site.

Farrat Thermal Break	TBN100
Max Loading Pressure N/mm² (MPa)	96
Strain at Maximum Pressure	10%
Compressive Modulus N/mm² (MPa)	2600
Shear Strength N/mm² (MPa)	72
Thicknesses mm	12, 25
Density g/cm³	1.16
Thermal Conductivity * W/m·K	0.29
Minimum Operating Temp ^oC	-30
Maximum Operating Temp ^oC	+90

All loading figures are maximum working (non factored) values and should not be exceeded.

*For comparison the thermal conductivity of steel = 54 W/m·K

Farrat always aims to hold high stock levels of 12 & 25mm thickness.
10 & 16mm thicknesses are usually kept in stock but in lower quantities than 12 & 25mm.

Where higher connection loadings are involved, Farrat also offers a very high load bearing capacity Thermal Break material (TBG 300).

For a price enquiry we need:

Material type
Length, Width & Thickness of plates
Number of holes to be cut into plate

To process an order we need:

As above
Plus:
Drawings of the plates, ideally as '.drg' files

Farrat

THERMAL BREAKCONNECTION PLATES

TBN 100

THERMAL BREAK
CONNECTION PLATES