CineSTEEL MAX

Designed specifically for 4DX auditoria, CineSTEEL MAX incorporates high damping isolators to control and constrain vibration while still providing exceptionally high sound insulation.

CineSTEEL MAX natural frequency, fire resistance and warranty
CineSTEEL MAX Technical Diagram with labels

Technical specifications are available on RIBA NBS Plus and NBS Create for rapid import.

DESIGN DETAILS

Key Features

ƒn @Operating Load:  12 Hz                Isolator Thickness: 50mm

ƒn @Dead Load:  14 Hz                        Isolator Type: Point Load, Bespoke-cut

Max Pressure: 4.0 kN/mm2                   Warranty: up to 25 Years

Max Live Load:  4x Dead Load

Our highest performing steelwork isolation system is based on hot-rolled structural steel supporting 150 mm thick cast in-situ concrete stadia and has been developed following years of research into cinema motion technology.

Future-proofed using the most extreme calibration routines from 4DX suppliers, CineSTEEL MAX not only isolates the vibration from adjacent auditoria, but also controls the inertial response in the structure that the 4DX seats are mounted to, offering superior motion feedback and a more immersive 4D experience.

Contact Farrat Technical for further advice and information regarding design.

Performance Graph

CineSTEEL MAX Performance Graph

Accreditations

ISO-9001 Standard
ISO-14001 Standard
Farrat are an Institute of Acoustics Sponsor

BUYER INFORMATION

Fast and Reliable Global Logistics

CineSTEEL MAX acoustic isolators have a 2-3 week lead time.

We hold stock in the UK, the UAE and Saudi Arabia, and regularly export worldwide.

Free Farrat Technical Support

Our team of engineers are always on hand to offer advice relating to specification, detailing and installation of CineSTEEL solutions.

 

We can deliver this remotely or on-site, anywhere in the world.

Low Life-Cycle Cost

All CineSTEEL MAX acoustic isolation systems are designed and manufactured with ease of installation, durability and follow-on trades in mind.

Fully Certified Solutions from Farrat

CineSTEEL MAX acoustic isolators are manufactured in the UK under an accredited ISO 9001:2015 quality management system.

Our performance test data is supplied from our in-house laboratory and is regularly checked & referenced with UKAS accredited laboratories.

200 Cinemas Project Experience

We regularly supply CineSTEEL MAX systems to market leading cinema operators.

 

These include: Cineworld, Vox, VUE, Empire, REEL, Odeon and UCI.

Ordering from Farrat

CineSTEEL MAX Acoustic Isolators

  • Product Code: CineSTEEL MAX acoustic isolators require bespoke calculation and design.
  • Measure: Please refer to the main CineSTEEL Guide for information on ordering bespoke designed isolators.

 

CineSTEEL MAX Acoustic Washer

  • Product Code: 2CS-M-16/20/24
  • Measure: Acoustic washers are available for M16, M20 and M24 fixings.
    • All fixings through isolators should incorporate
      an acoustic washer.
    • Only one side of the fixing  requires an acoustic washer (one washer per bolt).
    • Fixings to S.E Spec (typically ×4 per connection).
    • Hole for acoustic washer = bolt diameter + 7 mm.
CineSTEEL MAX Acoustic Isolator Example Layout

Contact our Technical Team

Where necessary we can also design bespoke configurations to meet your precise needs. Complete the enquiry form and our Technical Team will be in contact to discuss your project in more detail.

By submitting this form, you agree that you have read the Privacy Policy.
And consent to your data being used by Farrat.